Home Grown Pottery: November 2006

Wednesday, November 29, 2006

Pictures From The Celebration of Fine Arts

Here are some pictures of my booth at the Celebration of Fine Arts. The turnout wasn't too good because of the bad weather but we got some pretty good exposure anyway.

Saturday, November 25, 2006

Horse Hair Firing and Raku Firing from November 18

Here are some pictures from my latest firing. It was a pretty successful firing.

Monday, November 06, 2006

Raku and Horsehair Firing on November 5th

I did some more firing this past weekend in preparation for the Dublin Artists Guild's Celebration of Fine Art in conjunction with the Heart of Georgia Technical College's Festival of Trees the 21st and 22nd of this month and the Holiday Sale at the Oconee Cultural Arts Foundation in Watkinsville, Georgia on December 2nd and 3rd.
Here are some pictured of the results of the firing.

About Raku

Raku pottery is created with a specific firing process that uses fire, smoke and special glazes to create unique patterns and designs. After the pottery is made it is dried completely. Then the pots are bisque fired in an electric kiln to cone 04, which is about 1945°F. Then the pots are glazed with special raku glazes or low fire glazes. Then the pots undergo a firing process for approximately 30 to 45 minutes in a kiln that is fueled by propane and reaches temperatures of about 1800°F. In my kiln I can fire up to 4 pots at one time depending on the size of the pots.

After firing each piece is covered with newspaper or other organic matter and allowed to burn and smoke for a minute and then sprayed with water or covered by a container and allowed to smoke for a short time.

Raku pottery is for decorative purposes only and should NOT be used to hold liquids or to serve food.

About Horsehair

Once a pot has been made it is allowed to completely dry. Then terra sigillata, which is made of liquid clay, is applied and the piece is then polished to produce a nice shine on the piece. Then it is bisque fired in an electric kiln no higher than cone 012, which is about 870°F. Each piece is then fired approximately 30 to 45 minutes in a kiln that is fueled by propane and reaches a temperatureof about 1800°F.

The piece is then allowed to cool before the hair is applied. If the piece is too hot the hair will smudge and if it is too cool it won’t burn. On some pieces I spray ferric chloride, which I must do while wearing a respirator, which gives a a honey brown color.

Horsehair pottery is for decorative purposes only and should NOT be used to hold liquids or to serve food.

Home Grown Pottery